When the chain is exposed to temperatures beyond the recommended operating range, various issues may arise, such as reduced strength, increased wear, deformation, loss of lubrication properties, and potential failure of chain components.
Chains are common components in industrial and mechanical applications, but identifying the type of chain you’re using can sometimes be challenging. This article will explain how to determine the chain type (chain no.) you’re using, making it easier for you to maintain, replace, or purchase a chain of the same specification.
In mechanical equipment, it is common to require two or more chains to operate synchronously, necessitating identical lengths for proper functioning. In order to meet customer requirements, Maxtop is able to provide length matching and tagging services to ensure alignment with customer usage needs.
The measurement of the chain pitch is performed by measuring a specific length of the chain to ensure that the chain pitch conforms to the standard.
The push out force of a roller chain is the force required to push the pin from the outer plate or the bush from the inner plate. Therefore, it is also called “pushing force” or “pressing force”.
The fatigue strength test is considered to be the closest test method to the actual use of the chain.
Since the chain is constantly moving during use, it is also necessary to understand the fatigue life and endurance limit of the chain. The purpose of this test is to find out under what tensile load on the chain will (theoretically) never break. For general chains (excluding stainless steel chains), the fatigue strength is equivalent to the maximum allowable load.
In order to ensure chains high quality, MAXTOP chains will go through several inspections and tests to assure that the produced chain meets the specifications. We are going to introduce you some representatively important tests according to their purpose by the test.
After a period of hard work and laboratory evaluation, we finally obtained the TAF Certification Accreditation.
Check our roller chain inspection list to find out the probable causes of roller chain wear and action suggested to take.
Wear resistance is one of the elements for high-quality chains. Through test, we can find out the quality of chains and where to improve.
Through Ultimate Tensile Strength (UTS) test, we can review chain quality and inspect possible defects in the chain.
Salt spray test is to examine corrosion resistance of coated chain. The article is to introduce the standard and method how the test is done.
